Many people encounter many problems when using the photocuring 3D printer, such as model printing failure. There are many reasons for model printing failure. Is it the resin problem, the machine parameter problem, or the modeling slice problem? We need to analyze the problems on a case-by-case basis. Today, Hagong 3D Xiaobian will give you the analysis of light curing 3D printer printed out of the model is partial incomplete what is going on? How do we solve the problem of partial imperfections in the models printed by the photocuring 3d printer? I hope it will be helpful to you.
How is it that the model printed by the light curing 3d printer is partially incomplete? How to solve it?
1: The support is too small to effectively pull the model and add the support again;
2. Problems existing in the model, such as broken surfaces and bad edges, can be corrected through the model;
3: The wall thickness of the model is less than 0.5mm, and the effect of machine printing is also poor. At this time, the wall thickness can be increased to ensure that the wall thickness is at least 1mm.
4: Release film serious wear, poor light transmission, resulting in poor resin curing, can choose to replace a new release film.
Acme3d is a professional 3D printer R&D and manufacturer, focusing on 3D printing technology development and comprehensive application. ACME integrates research and development, production, marketing and service, and is committed to creating a 3D printing digital ecosystem. Its business fields cover 3D printers, 3d scanners, 3d printing consumables (photocuring resin), 3D scanners, 3D printing integrated services, etc. Its products are sold all over the world.