News
News
Focus on R&D, manufacturing and industry application solutions of 3D printing equipment
Blogs
Location: Home News Blogs
Table of Contents
Troubleshooting and troubleshooting methods for light-curing industrial-grade 3D printer series equipment!
admin |2022-12-30 |return to list

No matter which industrial-grade SLA light-curing 3D printer brand, enterprises will occasionally encounter some problems during use and operation. We can contact the technician or under the guidance of the technician, refer to the solution for troubleshooting:. If we can handle it ourselves, it will undoubtedly be better, increase our understanding, and exercise our practical ability. The following is the troubleshooting and troubleshooting methods of the SLA light-curing industrial-grade 3D printer series equipment collected by Harbin Engineering 3D Editor! I hope to be helpful.

 

Troubleshooting and troubleshooting methods for light-curing industrial-grade 3D printer series equipment!

 

Symptom

possible reason

solution

Scratched during molding

Support Design Flaws

Check and redesign supports

Resin absorbs moisture

Ensure that the humidity of the molding room is lower than 40%

mouth effect

Model opening or changing the processing direction

There are foreign objects on the bottom of the scraper

Clean the underside of the scraper

Molded parts, supports become soft

Resin absorbs moisture

Ensure that the humidity of the molding room is lower than 40%

Laser power is too small

Adjust software parameters

scan too fast

Adjust scan speed

Soft for thin-walled models, normal for thick-walled models

The waiting time after the model is solidified is not enough

increase curing time

scan too fast

Adjust scan speed

rough surface

The model support is soft or too little, and the product shakes when the scraper scrapes

Strengthen the support strength

model split

The waiting time after the model is solidified is not enough

increase curing time

Unreasonable support design

strengthen support

Inaccurate size

Inappropriate calibration parameters

Adjust calibration size parameters

Model warping during production

too much humidity

Turn on the industrial dehumidifier

Unreasonable support design

Heavy support, support and reinforcement where necessary

Laser power down

laser aging

Adjust software parameters and maintain the laser

Optical path offset

Adjust the light path

Computer crashes during production

The computer is overloaded for a long time

Restart the computer and continue the previous work

During the production process, the computer has large data transmission

Wait or restart the computer to continue production

machine not working

The emergency stop switch is not turned on

Turn on the emergency stop switch

The scraper cannot absorb the resin during production

Vacuum pump broken

Replace vacuum pump

The negative pressure is not adjusted properly

Adjustment

 
In fact, the above problems are not very complete. As a high-tech product, SLA light-curing industrial-grade 3D printers need to be used for a long time. If you encounter problems during use and solve them, you can ask the company's professional technology personnel to solve. Harbin Engineering 3D Co., Ltd. focuses on the R&D, manufacturing and industrial application solutions of 3D printing equipment; focuses on the construction of modern, intelligent and digital industrial manufacturing scenes for 3D printing; focuses on the R&D and process development of technical equipment in 3D printing related fields. From the research and development, production and sales of 3D printing equipment, printing consumables and customized products, it has realized the vertical layout of the whole industrial chain.
 
Copyright © 2022 Shanghai Acme Technology Co., Ltd. All Rights Reserved
Consult Us
Please Fill In The Following Information
+86 19958086067 Consult Us Get More Information, If You Need Help Contact Us